SZ11-GW-LoRa Gateway

Processor storage:Mips 24K core frequency 400MHZ 32bit system 128kB secondary storage Memory:16 MB SPI Flash&64 MB DDR2 RAM LoRa data transmission rate:300bps~5.4Kbps Ethernet communication rate:100Mbps LTE communication rate:50Mbps Maximum transmit power:25dbm Description:SZ11-GW-LoRa is based on things low-power, wide area network LoRaWAN application-level protocol gateway router can provide low-power devices for the Internet of things, mobile, secure two-way wireless communication local service, support LoRa 2G/3G/4G, Wi

Product definition 


SZ11-GW-LoRa is an IoT application-level gateway router based on low-power, wide-area LoRaWAN protocol. It can provide low-power, mobile and secure local two-way wireless communication services for IoT devices. It supports LoRa, 2G/. 3G/4G, WiFi and GPS wireless communication functions, customers can easily deploy their own IoT control system to achieve customized intelligent services. 
The SZ11-GW-LORA adopts a star architecture design. The front-end node device provides single or multiple SZ11-GW-LORA gateways to achieve wireless communication between the terminal device and the cloud server, and can also connect to the cloud server through standard IP. . Can be widely used in smart parking, smart fire, animal husbandry positioning management, movable property (mortgage) supervision, power cable monitoring, smart street lights, smart agriculture, smart environmental protection and other fields.

2. Gateway interface introduction

网关外部接口介绍
网关主板内部接口介绍

3. Gateway basic information 


1) Gateway LAN port IP: 192.168.3.1, the DHCP server is enabled by default;  
2) Web page user default: root, login password: WelcomeTo2018;  
3) WAN defaults to open DHCP client, need to connect router;  
4) 4G/LTE Three types, China Three Netcom, European LTE system, US 4G standard, default automatic dialing;  
5) Wi-Fi hotspot: GW5000_+ gateway ID 6 characters at the end, password: gateway2018better;  
6) WAN and 4G network, traffic default use WAN priority, 4G standby, WAN port does not work, switch 4G traffic; gateway needs network that can access the Internet normally, network delay (ping test.smartkit.io) is less than 50ms, use Ethernet, network speed should be greater than 2M; use 4G card The monthly traffic package should be greater than 6G (depending on the number of nodes);  
7) TF card file format default FAT32, when the remaining capacity is lower than 2G, the oldest log file will be cleared;   
8) Gateway ID naming rules: The physical address of the xx02+WAN port, the first two digits represent the regional frequency band used by the gateway;  
Note: 00 for CN470-510; 01 for EU863-870; 02 for US902-928; 03 for KR 915-928; 04 for INDIA86 5-867; 05 stands for AS923; 06 stands for AU915-928; 07 stands for EU433.     
9) Support foreign server TTN;  
10) Support gateway timing reporting status (WAN, LTE, LoRa, WiFi, TF card);  
11) Support gateway to report LoRa configuration parameters periodically;  
12) Support remote delivery modification of LoRa parameters;  
13) Support Remote upgrade;  
14) support remote restart; 
15) Support remote administrator login, maintenance and repair;  
16) Support button or WEB operation to restore factory settings;  
17) For security reasons, root login SSH2 and serial port have been disabled, and the login SSH2 and serial port accounts are not open to the public.

4. Gateway frequency setting 


4.1.CN470-510 frequency point  
frequency table is as follows (default A12B12, 8 frequency points from 487.9MHZ to 489.3MHZ)

Frequency

4.2. The 
default frequency of the EU863-870 frequency point  is as follows (8 frequency points from 867.1MHZ to 868.5MHZ):

Frequency

4.3. US902-928 frequency 


The frequency table is as follows (default A1B1, red part, 8 frequency points from 902.3 MHZ to 903.7MHZ):

US902-928Frequency

4.4. The 
default frequency of the AS923 frequency point  is as follows (8 frequency points from 923.2 MHZ to 924.5MHZ):

AS923 default frequency 

 

Product Size

产品尺寸

6. Technical parameters

Performance parameterProcessor storageMips 24K core 
frequency 400MHZ 
32bit system 
128kB secondary storage
Memory16 MB SPI Flash 
64 MB DDR2 RAM
Wireless performance parameterLoRa data transmission rate300bps to 5.4Kbps
Ethernet communication rate100Mbps
LTE communication rate50Mbps
working frequencyCN470MHz~510MHz 
EU863MHz~870MHz 
US902MHz~928MHz
Maximum transmit power25dbm
Receiving sensitivity-143dBm 
aisle9 configurable channels (8 channels with bandwidth of 125KHZ, adaptive rate, support for spreading factor SF7~SF12, 1 250KHZ/500KHZ high speed channel)
Communication Interface1 LAN, 1 WAN, 1 WIFI, 1 LTE module
TF cardBuilt-in 32GB TF card, support high speed card
Electrical characteristicsElectrical voltagePOE power supply 48V input (24~48V)
Operating temperature-30 ° C ~ 80 ° C
Working humidity10% to 90%
Physical parameterProtection levelIP67
 size288mm*215mm*59mm     
 CertificationCE/FCC
 Lightning protectionOptional

6. Installation method

安装方法

1. SIM card installation  
gateway shutdown state Use a hex driver to open the back of the gateway screws (as shown)

Place the prepared 4G SIM card (Unicom/Telecom/Mobile optional one) with the chip facing out, and insert the notch into the SIM card holder, as shown in the figure.

 

2. The antenna installation  
 gateway is mounted on the pole, and the antenna is facing upwards. From left to right, the Wifi antenna, the LoRa antenna, the GPS antenna, and the 4G antenna are fixed, and the antennas are fixed to the corresponding interfaces. As shown below:

3. Machine installation

 

 

 

 

 

Online customer service
Online customer service system